Need help?Do you have a question about the Bosch Professional Series and is the answer not in the manual?
General| Brand | Bosch |
|---|---|
| Model | Professional Series |
| Category | Power Tool |
| Language | English |
Instructions on where to point the detector and which locations to avoid to ensure correct operation and prevent false alarms.
Description of various installation methods including direct wall/corner mounting and using specialized brackets.
Specifics on selecting and installing mounting brackets (B335, B328, B338) for detector alignment and wiring.
Illustration of LSN wiring connections and recommended specifications for voltage limits and cable types.
How to enable/disable the look-down zone for detecting motion directly underneath the detector to minimize false alarms.
Step-by-step instructions for accessing and modifying detector settings using the MAP 5000 Remote Programming Software.
How to configure the detector's detection range (short or long) using remote programming software based on the area to be monitored.
Enabling and configuring the anti-mask feature to detect attempts to obstruct or tamper with the detector lens.
Guidelines for performing walk tests to ensure proper detector function, including establishing coverage and adjusting sensitivity.
Troubleshooting steps for when the detector fails to respond to motion, covering power, wiring, and level issues.
Diagnosing and resolving issues causing the detector to remain in a continuous alarm state, including masking.
To Next Page