Bosch Rexroth 11 Series - Page 36

36/64 Installation
Bosch Rexroth AG, A15V(L)O Series 11, RE 92511-01-B/2019-10-09
5
3
4
4
1
2
or
X (LRDRS.)
(Y D2)
Fig. 13: Removing transportprotection
1 Protective cover
2 Threaded plugs
3 Protective plug
4 Steel flange covers (the flange cover
on the suction portprovides a
secure stand and protection for the
V
g max
stop)
5 For version with through drive,
protective cover and mounting bolts
Ports intended for connecting lines come with protective plugs and/or threaded
plugs, which serve as transportprotection. Connect all ports required for
functional operation (see Table 12 "Ports A15VO/A15VLO series 11" on
page41). Failure to do so could lead to malfunctions or damage. If a portis not
being used, plug it with a threaded plug since the protective plugs are not
pressure-resistant.
Important for D2 controllers! Port Y is equipped with a protective plug (3).
Thisportmust be connected. Failure to do so could lead to malfunctions or
damage.