Bosch Rexroth 3 Series - About this Documentation

RE 92105-01-B/06.2017, A4CSG, Series 3x, Bosch Rexroth AG
3/68 Contents
Contents
1 About this documentation 5
1.1 Validity of the documentation 5
1.2 Required and supplementary documentation 5
1.3 Representation of information 6
1.3.1 Safety instructions 6
1.3.2 Symbols 7
1.3.3 Designations 7
1.3.4 Abbreviations 7
2 Safety instructions 8
2.1 About this chapter 8
2.2 Intended use 8
2.3 Improper use 8
2.4 Personnel qualifications 9
2.5 General safety instructions 10
2.6 Product-specific safety instructions 11
2.7 Personal protective equipment 14
3 General instructions on damage to property and theproduct 15
3.1 Operator's obligations 17
4 Scope of delivery 18
5 About this product 19
5.1 Performance description 19
5.2 Product description 19
5.2.1 Layout of the axial piston unit 19
5.2.2 Functional description 20
5.3 Product identification 21
5.3.1 Name plate of the axial piston unit 21
6 Transport and storage 22
6.1 Transporting the axial piston unit 22
6.1.1 Transporting by hand 22
6.1.2 Transporting with a lifting device 23
6.2 Storing the axial piston unit 24
7 Installation 27
7.1 Unpacking 27
7.2 Installation conditions 27
7.3 Installation position 28
7.3.1 Below-reservoir installation (standard) 28
7.3.2 Above-reservoir installation 29
7.4 Installing the axial piston unit 32
7.4.1 Preparation 32
7.4.2 Dimensions 32
7.4.3 General instructions 32
7.4.4 Installation with coupling 33
7.4.5 Installation on a gearbox 34
7.4.6 Installation with cardan shaft 35
7.4.7 Completing installation 35
7.4.8 Hydraulically connecting the axial piston unit 37