Disposal 57/68
RE 92105-01-B/06.2017, A4CSG, Series 3x, Bosch Rexroth AG
12 Disposal
Careless disposal of the axial piston unit, the hydraulic fluid and the packaging
material can result in environmental pollution.
Observe the following points when disposing of the axial piston unit:
1. Completely drain the axial piston unit of hydraulic fluid.
2. Dispose of the axial piston unit and packaging material in accordance with the
national regulations in your country.
3. Dispose of the hydraulic fluid according to the national regulations in your
country. Also observe the applicable safety data sheet for the hydraulic fluid.
4. Disassemble the axial piston unit into its individual parts and properly recycle
these parts.
5. Separate according to the following:
– Castings
– Steel
– Aluminum
– Non-ferrous metal
– Electronic waste
– Plastic
– Seals
To Next Page
Loading...
