58/68 Extension and conversion
Bosch Rexroth AG, A4CSG, Series 3x, RE 92105-01-B/06.2017
13 Extension and conversion
Do not modify the axial piston unit or its assembled parts. This also includes
changing the wiring.
Changes to settings on the customer side should only be made using the product-
specific setting instructions.
The warranty from Bosch Rexroth only applies to the product configuration as
delivered. The warranty is void if the unit is modified or extended.
The setting screws are protected against unintentional adjustment by caps.
Adjusting the setting screw will void the warranty. If you need to change settings,
contact your Bosch Rexroth service partner, for the address, see chapter 10.5
“Spare parts” on page 55.
To Next Page
Loading...
