50/68 Maintenance and repair
Bosch Rexroth AG, A4CSG, Series 3x, RE 92105-01-B/06.2017
Task to be performed Interval
Axial piston unit Check axial piston unit for leakage.
Early detection of hydraulic fluid loss can help to
find faults on the machine/system and rectify them.
For this reason, Bosch Rexroth recommends that
the axial piston unit and system are always kept in a
clean condition.
Daily
Check axial piston unit for unusual noise
development.
Daily
Visual inspection for external integrity, housing
damage.
Daily
Check fastening elements for tight seating.
All fasteners have to be checked when the hydraulic
system is switched off, depressurized and cooled
down.
Monthly
Change the filter element in optionally mounted
filters. The replacement interval may vary depending
on the degree of contamination of the hydraulic fluid.
We recommend using a contamination indicator.
Half-yearly or every
500 operating hours
(whichever occurs first)
To Next Page
Loading...
