Bosch Rexroth A2FM series - Ordering Code; And Rear

Bosch Rexroth AG, RE 91001-01-X-B2/01.2016
2 A2FM for explosive areas | Axial piston fixed motor
Ordering code
1) Fastening thread or threaded ports, metric
2) Threaded connections at the sides sealed with threaded plugs
3) Indicate ordering code for counterholding valve BVD separately as
per data sheet 95522.
Note the restrictions described on page 24.
Ordering code
01 02 03 04 05 06 07 08 09 10 11
A2F M / 61 W – B J
Axial piston unit
01 Bent‑axis design, fixed, , nominal pressure 400 bar, maximum pressure 450 bar
A2F
Operating mode
02 Motor (plug‑in motor A2FE, see data sheet 91008‑01‑X‑B2) M
Size (NG)
03 Geometric displacement, see Technical data on page 7
10 12 16 23 28 32 45 56 63 80 90 107 125 160 180
Series
04 Series 6, index 1
61
Direction of rotation
05 Viewed from drive shaft, bidirectional
W
Sealing material ATEX version
06 ATEX device category 3G (normal level of safety), shaft seal ring made of FKM (fluor‑caoutchouc)
A
ATEX device category 2G (normal level of safety), shaft seal ring made of FKM (fluor‑caoutchouc)
R
Drive shaft 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180
07 Splined shaft DIN 5480
● ● ● ● ● ● – ● ● ● ● ● ● ● ● A
● ● – ● ● – ● ● – ● – ● – ● – Z
Parallel keyed shaft, DIN 6885
● ● ● ● ● ● – ● ● ● ● ● ● ● ● B
● ● – ● ● – ● ● – ● – ● – ● – P
Mounting flange
08 ISO 3019‑2; 4‑hole
B
Port plate for working lines
1)
10 12 16 23 28 32 45 56 63 80 90 107 125 160 180
09 SAE flange ports A and B at rear
– – – ● ● ● ● ● ● ● ● ● ● ● ● 010
SAE flange ports A and B at side, opposite
– – – ● ● ● ● ● ● ● ● ● ● ● ● 020
Threaded ports A and B, at side, opposite
● ● ● ● ● ● – – – – – – – – – 030
Threaded connections A and B at side
and rear
2)
● ● ● ● ● ● ● ● ● – – – – – – 040
SAE flange ports A and B at bottom (same
side)
– – – – ● ● ● ● ● ● ● ● ● ● ● 100
Port plate with 1‑stage pressure‑
relief valves for mounting a coun‑
terbalance valve
3)
BVD20 – – – – – – – – – – – ● ● – – 178
BVD20/25 – – – – ● ● ● ● ● ● ● ● ● ● ● 188
Rotary group
10 Version J
J
Special version
11 Special version
-S
●
= Available
–
= Not available Note
Note the project planning notes on page29.