RE 91001-01-X-B2/01.2016, Bosch Rexroth AG
Details on explosion protection
▶ Field of application according to ATEX 94/9/EC
▶ Gas: II 2G ck IIB Tx in accordance with
DINEN13463‑1:2009, DINEN13463‑5:2011
Features
▶ Fixed motor with axial tapered piston rotary group of
bent‑axis design, for hydrostatic drives in open and
closed circuits.
▶ For use in mobile and stationary applications
▶ The output speed depends on the flow of the pump and
the displacement of the motor
▶ The output torque increases with the pressure differen‑
tial between the high‑pressure side and the low‑pres‑
sure side.
▶ Finely graduated sizes permit far‑reaching adaptation to
the drive concerned
▶ High power density
▶ Small dimensions
▶ High total efficiency
▶ Good starting efficiency
▶ Economical design
▶ One‑piece tapered piston with piston rings for sealing
▶ Series 61
▶ Sizes 10 to 180
▶ Nominal pressure 400bar
▶ Maximum pressure 450 bar
▶ Open and closed circuits
Axial piston fixed motor A2FM
for explosive areas
II 2G ck IIB Tx
Part II of instruction manual
according to ATEX directive
94/9/EC data sheet
RE 91001-01-X-B2
Edition: 01.2016
Replaces: 04.2009
Ordering code 2
Hydraulic fluids 3
Shaft seal 5
Flow direction 5
Speed range 5
Working pressure range 6
Technical data 7
Dimensions, sizes 10, 12, 16 10
Dimensions, sizes 23, 28, 32 12
Dimensions size 45 14
Dimensions sizes 56, 63 16
Dimensions sizes 80, 90 18
Dimensions sizes 107, 125 20
Dimensions sizes 160, 180 22
Counterbalance valve BVD 24
Installation instructions 27
Project planning notes 29
Safety instructions 29
Contents
To Next Page
Need help?
General