Safety instructions 17/104
RE 92076-01-B/10.2017, A4... with HS5E pilot control valve/Series 3x, Bosch Rexroth AG
CAUTION
Missing potential equalization on the hydraulic unit!
Uncontrolled function of the axial piston unit.
▶ Missing or incorrect potential equalization on the hydraulic unit can lead
to its functions being uncontrolled. Depending on the application, this can
lead to hazards to people. This means that you must ensure proper potential
equalization by means of the existing pin assignment on the connector side.
NOTICE
Interference due to electromagnetic radiation!
Uncontrolled movements in the system.
▶ The hydraulic unit with its electronic components can interfere with other
electronics systems by emitting electromagnetic radiation. Apart from this,
hydraulic units with electronic components can be interfered with by the
electromagnetic radiation of other electronics systems and magnetic fields. In
both cases, this can lead to uncontrolled movements in the system.
▶ Pay attention to the limit values for electromagnetic radiation and, if necessary,
screen electronic components, connecting, and signal lines appropriately.
▶ Make sure that there is an adequate distance between the electronics, including
the connecting and signal lines, and high-voltage current-conducting lines.