1 About this documentation
1.1 Validity of the documentation
This documentation is valid for energy storage device of the BA1N series and
must be observed by assemblers, operators, service engineers and facility
operators.
1.2 Editions of this documentation
Edition
Release
date
Notes
01 2019-08 First edition
Tab. 1-1: Record of revisions
1.3 Additional documentation
Operate this product only, if you have the following documentation available.
You must understand and observe this documentation.
Technical data, operating characteristic curves, dimension sheets a.s.o. are
included in the project planning manual of BA1N for all types.
Title Document type Document number
BA1N - Kinetic Energy Buffer
Project Planning
Manual
DOK-MOTOR*-BA1N*******-PR□□-□□-P
Tab. 1-2: Additional documentation
1.4 Information presentation
Safety instructions
The safety instructions in this documentation describe signal words (danger,
warning, caution, note) and a signal symbol (acc. to ANSI Z535.6-2006).(dan‐
ger, warning, caution, note) .
The signal word is intended to draw your attention to the safety instructions
and describes the seriousness of the danger. The warning triangle with excla‐
mation mark indicates the danger for persons.
Non-compliance with this safety instructions will result in death or severe per‐
sonal injury.
Non-compliance with this safety instructions can result in death or severe
personal injury.
BA1N Kinetic Energy Buffer 1/49
About this documentation
R911393267_Edition 01 Bosch Rexroth AG
To Next Page
Loading...
