Bosch rexroth IndraDrive Mi KMV03 - KMV03 Physical Dimensions

Description Symbol Unit
KMV03.1R-
A05K0-P-D7-
ET-NNNN
KMV03.1R-
B0007-P-D7-
ET-NNNN
KMV03.1R-
I01K5-P-D7-
ET-NNNN
KMV03.1R-
W06K0-P-D7-
ET-NNNN
Required wire size in accordance
with NFPA 79 and UL 508 A (in‐
ternal wiring);
6)
A
LN
AWG min 14
Output voltage
U
out
V DC 750
Output current
I
out
A 6.7 10.0 2.0 8.0
Power dissipation at continuous
current and continuous DC bus
power respectively
7)
P
Diss_cont
W 390 500 220 430
1) 2) 3) Housing dimension; see also related dimensional drawing
4) Mains voltage > U
LN
: Use a transformer with grounded neutral
point, do not use autotransformers!
5) Type in accordance with UL: Class J LPJ-15SP at most; suita‐
ble for use on a circuit capable of delivering not more than
42000 rms symmetrical amperes
6) Copper wire; PVC-insulation (conductor temperature 90 °C;
T
a
≤ 40 °C) in accordance with NFPA 79 chapter 12 and
UL 508A chapter 28
7) Plus dissipation of braking resistor and control section
8) The following power supply unit has to be used in the scope of
CSA/UL:
● UL508-certified
● Output voltage: DC 24V
● Output current: ≤ 40 A
For power supply units with output current > 40 A: install UL-
listed fuses for limitation to 40 A
Tab. 2-1: KMV - UL ratings and dimensions
6/29
Ratings and dimensions
IndraDrive Mi KMV03 Distributed Supply Unit KNK03 Distrib‐
uted Mains Filter
Bosch Rexroth AG R911374765_Edition 01