Need help?Do you have a question about the Bosch Rexroth IndraDrive Mi KCU02 and is the answer not in the manual?
General safety precautions and requirements for operating drive system components.
General safety precautions and requirements for operating drive system components.
Guidelines to prevent hazardous contact with live electrical parts and housings.
Measures to prevent injury from unintended machine movements or parts.
Safety measures for individuals with pacemakers or implants near magnetic fields.
Precautions to avoid burns from hot surfaces of drive components.
Safety instructions for proper handling and mounting of components.
Guidelines for safe handling, charging, and disposal of batteries.
Defines the intended applications and operating conditions for the product.
Explains the structure and meaning of the product's type code.
Describes the information found on the device's type plates.
Lists the standard and optional accessories included with the product.
Overview of documentation related to drive systems and their components.
Lists available documentation for different types of Rexroth motors.
Information on documentation for connection cables.
Details documentation related to product firmware.
Basic information on the usage and compatibility of the KCU02.
Instructions for installing and using the touch guard for safety.
Shows the wiring for HCS02 supply unit and KSM power section.
Shows the wiring for HMV01 supply unit and KSM power section.
Shows the wiring for HCS03 supply unit and KSM power section.
Shows the wiring for HMV02 supply unit and KSM power section.
Illustrates the overall connection layout of the KCU02 electronic control system.
Identifies and describes the function of each connection point on the KCU02.
Details the proper connection for equipment grounding conductors for safety.
Explains methods for establishing effective ground connections for device housings.
Describes the 24V supply terminal block and its connections.
Details the DC bus connection terminal block (L+, L-).
Explains the X49 terminal for Safe Torque Off functionality.
Provides essential guidelines for installing the drive controller safely and correctly.
Provides essential guidelines for installing the drive controller safely and correctly.
Explains the meaning of the LEDs on the KCU02 for diagnostics.
Step-by-step instructions for safely replacing fuses F4 and F5.
Basic rules for designing installations to comply with EMC standards.
Guidelines for optimal EMC installation in facilities and control cabinets.
Exemplary arrangements for mounting in control cabinets based on interference areas.
Specific design and installation rules for interference-free control cabinet areas.
Specific design and installation rules for interference-susceptible control cabinet areas.
Specific design and installation rules for strongly interference-susceptible areas.
Procedures for establishing proper ground connections for EMC compliance.
Recommendations for routing and installing signal lines to minimize interference.
General methods for suppressing radio interference from components.
Overview of available accessories for the IndraDrive Mi system.
Details on the mounting and usage of the HAS02 accessory.
Information on the environmental impact and production processes of the products.
Guidelines for returning and disposing of products and batteries.
Technical data for digital inputs, including safety options.
Technical data for digital outputs, including safety options.
To Next Page
General