1−10 Electric Drives
and Controls
Bosch Rexroth AG BT 6.00 1070080078 / 03
Safety Instructions
DANGER
Danger of bruises and of being caught by electrode and/or work-
piece movements!
All users, line designers, welding machine manufacturers and
welding gun producers are obliged to connect output signals
which initiate the electrode movement so that the applicable
safety regulations are complied with.
For example, by means of ”Two-handed start”, fences, light barri-
ers etc. the risk of bruises can be considerably reduced.
CAUTION
Danger of overheating in the event of incorrect or insufficient cool
ing.
The temperature inside the housing must be within the specified
limits.
1.9 Retrofits and modifications by the operator
DANGER
Any changes made to the product may endanger the safety of the
unit!
The possible consequences include death, severe or light injury
(personal injury), damage to property or environmental hazards.
Therefore, you should contact us before performing any intended
changes. This is the only way to find out whether or not changes
can be made safely.
To Next Page
Loading...
