6
B O S C H
ºC
2. Heating
Remove any labels or protective covering from the
soleplate (10).
1 Plug in the iron.
2 “SensorSecure” function will be activated and the
indicator lamp (2) will ash.
3 The “TempOK” indicator lamp (1) will ash, indicating
that the iron is heating up. When the iron is ready to
use, the indicator lamp will remain lit continuously.
“i-Temp” technology
This technology sets an appropriate temperature, which is
suitable for all fabrics that can be ironed (symbols
).
The “i-Temp” technology does not apply to fabrics that
cannot be ironed (symbol
).
Please check the garment care label for details or try
ironing on a part of the fabric not visible normally.
3. “SensorSecure” function
After the initial heating, “SensorSecure” function switches
off the iron when it is left unattended, thus increasing
security and saving energy.
1 While the handle is gripped, the iron heats up. The
“SensorSecure” indicator lamp (2) will remain lit
continuously.
2 When the handle is released, the “SensorSecure”
function is activated. The “SensorSecure” indicator
lamp (2) will ash.
To Next Page
Loading...
