7
B O S C H
4. Steam settings
The steam regulator (5) is used to adjust the amount of
steam produced when ironing.
Steam setting Steam regulator
High steam ow
Medium steam ow
Dry ironing
Tip: Try to iron the fabrics while they are still damp after
washing. Steam will be generated from the fabrics rather
than the iron.
shot
5. Shot of steam function
Shot of steam can be used to remove stubborn wrinkles
or to press in a sharp crease or pleat.
1 Press the shot of steam button (4) repeatedly with
intervals of at least 5 seconds.
6. Vertical steam
Vertical steam can be used to remove creases from
hanging clothes, curtains etc.
1 Hang article of clothing on a clothes hanger.
2 Operate the iron in a vertical position at a distance of
10 cm / 4 in, and press the shot of steam button (4)
repeatedly with pauses of at least 5 seconds.
Important: If the “SensorSecure” indicator lamp (2)
ashes while ironing in a vertical position, it means that
the handle is not properly gripped and the iron will cool
down.
10 cm / 4 in
To Next Page
Loading...
