Horizontal configurability | 11SM Series Heat Pump
6 720 220 406 (2013/1)SM Series Heat Pump
Figure # 30
10. Remove and discard blower collar by removing
(8) screws. (Figure #31)
Figure # 31
11. Reorient the blower assembly 180 degree with
blower “belly” up. (Figure #32)
Figure # 32
12. Move the blower back into the cabinet. (Figure
#33)
Figure # 33
13. Reinstall (2) vertical blower brackets in the
new horizontal position using (4) screws.
(Figure #34)
Figure # 34
Unit top is notched to allow blower to slide
through.
To Next Page
Loading...
