SSB 6720866942 (2018/06) US
Product description | 7
2.6 Technical data
Unit SSB 800 SA SSB 1000 SA SSB 1000 TL
Boiler Category ASME Sect.IV
Type of Gas Natural Gas, Propane*
Max input rate
BTU/hr 798,000 1,024,000 1,024,000
(kW) (234) (300) (300)
Min input rate
BTU/hr 79,800 100,000 100,000
(kW) (23) (29) (29)
Turndown Rate 10:1 10:1 10:1
Gas Connections Ø Inch 2” (NPT) 2” (NPT) 3” (anged)
Max. NG Pressure
Inch W.C. 20 20 20
(mbar) (50) (50) (50)
Recommended NG Pressure
Inch W.C. 8 8 8
(mbar) (20) (20) (20)
Min. NG Pressure
Inch W.C. 3.5 3.5 3.5
(mbar) (8.7) (8.7) (8.7)
Max. LPG Pressure
Inch W.C. 20 20 20
(mbar) (50) (50) (50)
Min. LPG Pressure
Inch W.C. 8 8 8
(mbar) (19.9) (19.9) (19.9)
CO
2 Working Range (NG) % 8.8 – 9.2 8.8 – 9.2 8.8 – 9.2
CO
2 Working Range (LP) % 10.3 - 10.7 10.3 - 10.7 10.3 - 10.7
Water Connections Ø Inch 3 “ 3 “ 5”
Max. Allowable Working Pressure (MAWP)
PSI 80 80 80
(bar) (5.5) (5.5) (5.5)
Water Volume
Gallon 13 16 20
(liter) (50) (60) (75)
Vent/Air Intake Connections
Ø Inch 6 6 10
(Ø mm) (160) (160) (160)
Vent Materials CPVC, PP, Stainless Steel AL29-4C
Max operating temperature
°F 194 194 194
(°C) (90) (90) (90)
Max HE allowable temperature
°F 210 210 210
(°C) (98.9) (98.9) (98.9)
Ambient storage temperature
°F 5 to 158 5 to 158 5 to 158
(°C) (-15 to 70) (-15 to 70) (-15 to 70)
Ambient functioning
temperature
°F 32 to 120 32 to 120 32 to 120
(°C) (0 to 49) (0 to 49) (0 to 49)
Surface heat exchanger per module
SQFT 27 43 43
(m2) (2.5) (4) (4)
Standard Listings & Approvals CSA, ASME, AHRI
Electrical Req. 120V/1PH/60Hz 15.1 FLA* 15.1 FLA* 15.1 FLA*
Weight (dry)
lbs 860 992 1124
(kg) (390) (450) (510)
Dimension WxHxD
Inch 35.4x70.9x31.5 35.4x70.9x31.5 35.4x70.9x31.5
(mm) 900x1800x800 900x1800x800 900x1800x800
(*) FLA (Full Load Amperage) – maximum current drawn by the boiler if all pumps reach rated horsepower
To Next Page
Loading...
