Pict.21 – Temperature limiter (activation at 85ºC)
The thermal fuse is located around the heat exchanger and for protection is insulated,
nevertheless is composed by 4 specific fuses that melt at 192 ºC in the event of an overheating.
Pict.22 – Thermal Fuse with / without insulation
Pict.23 – Thermal Fuse detail
4.7 Water Inlet Assy
The inlet water valve contains the water connection of ¾” that integrates also the filter and
the flow restrictor according country characteristics.
Flow rate valve / Filter
The inlet water valve contains the filter and is acessible removing screw nº1 and pulling out the
valve with know nº2.
To Next Page
Loading...
