58300000111195_ARA_en_f.doc – 02.06.09 Seite 63 von 102
6.1.3 Greasing the brewing unit
During a service, the O-ring for the coffee outlet (A), the lip seal
surrounding the brewing head (B), the O-ring for the water inlet (C)
and the coupling for the input shaft (D) must be thinly greased with
food-safe special lubricating grease PARALIQ® GTE 703 Mat.-no.:
31 0574.
Note:
After replacing the O-ring for the coffee outlet (A) or fo
the water inlet (C) they must be thinly greased with food-
safe special lubricating grease PARALIQ® GTE 703
Mat.-no.: 31 0574.
To Next Page
Loading...
