OlOL 0 J
++++,f+#+off++ I
DESERLER// TUR_
+,',' r+,','P+]] +RrsR I
SrR ++-I_+GN
TURI+,
COFFEff
u ,,IT DE++
SrLRLI I+,G
TRREIS
[] The illuminated ring on the calc descaling button
flashes while the descaling program is running.
The descaling program starts in
FI' TER I'I
L, 0 / 0 LO programming
mode only. Never descale the
appliance while the filter is inserted.
While the descaling program is running
approx. 35 minutes processes and instructions are
indicated on display.
The specified times may differ.
Start descaling program
Hold down the calc descaling button for
at least 3 seconds.
Empty and re-insert tray 23 and coffee dreg
tray 21.
Fillthe water tank with water and add descaling
agent
or
add 0.5 qt. of ready-prepared descaling mixture.
Place a large receptacle under nozzle.
Set function selector to /!\, position.
Note: The appliance is automatically descaled.
Descaling solution flows at intervals into the
receptacle. Wait for the next message on display
(approx. 10 minutes).
Set function selector to _ position.
Note: The appliance is automatically descaled.
Descaling solution flows at intervals into the tray 23.
Wait for the next message on display
(approx. 10 minutes).
Empty and re-insert tray 23 and coffee dreg
tray 21.
29
To Next Page
Loading...
