Bosch TouchOne - Arming the System; Arming in AWAY Mode

8 9
5. Setup Wizard
When the TouchOne is powered on for the rst me, it will display a setup wizard, allowing
you to congure the device.
You can restore the TouchOne to factory defaults and complete the setup wizard again
by touching the Sengs buon from the home screen, then Installer Opons and then the
Restore to factory defaults buon. You will require the control panels installer PIN to access
the Installer Opons menu.
6. Internet Connecvity
During the setup wizard, you will be requested to connect the TouchOne to a local WiFi
network. As the TouchOne is a security device, ensure you only connect it to a WiFi network
that uses at least WPA security. WEP security is not a suitable encrypon method for this
device.
WiFi is required for the TouchOne to receive automac updates and to download and use
Apps like the Intercom App. The date and me must be correct before automac updates
and App funconality is enabled.