3. Setup and operation of the parking lot sensor in the backend
In order to set up the sensor in the LoRaWAN backend, the following information is required, which will be provided to
you by BCDS GmbH:
devEUI (for example, FCD6BD0000190001)
appKey (for example, AABBCCDDEEFFGGHHIIJJKKLLMMNNOOPP)
appEUI (FCD6BD0000190000)
Additional information on operating the parking lot sensor can be found on our website at https://www.bosch-
connectivity.com/parking-lot-sensor/downloads/.
12. Technical specifications
Table 1 Device specifications
Additional information can be found in the datasheet on the website at https://www.bosch-connectivity.com/parking-lot-
sensor/downloads/.
To Next Page
Loading...
