Bosch VG4 Series User Manual

AutoDome Modular Camera System VG4 Firmware Updates via a TCP/IP Network | en 5
Bosch Security Systems, Inc. Firmware Update Manual F01U096914 | 1.05 | 2008.10
Table 1.1 Firmware files and their function
Figure 1.5 Select a Firmware file to upload
3. Click the Upload Firmware button.
Figure 1.6 Upload Firmware
File Name AutoDome Series/Module Function
Vip_x_app1.fw IP Communications Module Updates the IP Comms module firmware.
SCBootApp.g4i 200, 300, 500i Updates the system controller boot
firmware.
SCMain.g4i 200, 300, 500i Updates the system controller firmware.
FPGA_SC.g4i 200, 300 Updates the FPGA chip.
FPGA_VCA.g4i 500i Updates the FPGA chip.
VCA_boot.g4i 500i Updates PTZ camera Video Content
Analysis firmware. Install this file in
addition to the SC_Boot.g4i file.
VCA_app.g4i 500i Updates PTZ camera Video Content
Analysis firmware. Install this file in
addition to the SC_Main.g4i file.
language_Lang 200, 300, 500i Uploads an additional language file for the
VG4 on-screen display menus.
*.img 100 Series Fixed Camera Updates fixed camera firmware.
!
CAUTION! If a service pack contains an upgrade to the IP firmware file (Vip_x_app1.fw), you
must upgrade the IP firmware before you perform any other firmware update. (For example,
before uploading SCBootApp.g4i or SCMain.g4i).

Bosch VG4 Series Specifications

General

Weatherproof Rating	IP66
Pan Range	360° continuous
Communication	RS-485
Lens Type	Varifocal
Day/Night	Yes
Power	12V DC