What to do if Bosch VIDEOJET 7000 is not operational after firmware upload?
If your Bosch Media Converter is not operational after a firmware upload, this may be due to a power failure during programming or an incorrect firmware file. In either case, have the unit checked by Customer Service and replace it, if necessary.
How to troubleshoot no image on Bosch VIDEOJET 7000?
If there is no image on the monitor when using the Bosch Media Converter, first check the input selection on the monitor. Then, examine all cables, plugs, and connections to ensure they are properly connected. If the issue persists, try connecting another monitor to the unit or using a different monitor connection to rule out a monitor fault.
General| Category | Media Converter |
|---|---|
| Model | VIDEOJET 7000 |
| Manufacturer | Bosch |
| Frame Rate Conversion | Yes |
| Power Supply | 12V DC |
| Weight | 500 g (1.1 lb) |
| Relative humidity | 10% to 90% (non-condensing) |
| Input voltage | 12 VDC |
| Supported Resolutions | 1080p, 1080i, 720p, 576i, 480i |
| Operating temperature | 0 °C to +45 °C |
| Storage temperature | -20 °C to +70 °C |
| Dimensions (W x H x D) | 44 mm x 129 mm x 100 mm |
To Next Page
