Need help?Do you have a question about the Bosch VIDEOJET decoder 7000 and is the answer not in the manual?
General| Model | VIDEOJET decoder 7000 |
|---|---|
| Video Decoding | H.264, MPEG-4 |
| Max Resolution | 1920 x 1080 |
| Network Interface | 10/100/1000 Ethernet |
| Power Supply | 12 VDC |
| Operating Temperature | 0°C to +50°C |
| Audio Decoding | AAC |
| Protocols | TCP, UDP, HTTP, HTTPS, RTP, RTSP, IGMP |
| Connectors | HDMI, Ethernet, USB |
Details critical safety precautions to prevent electric shock hazards during operation and installation.
Illustrates and identifies all physical ports, user controls, and status indicators on the decoder unit.
Details environmental conditions, ventilation, and cable management requirements for proper installation.
Emphasizes the critical order for making all connections before powering the unit to prevent damage.
Explains how to connect the decoder to a network using an Ethernet cable and RJ45 socket.
Details on connecting the included power supply unit and selecting the appropriate power cord.
Describes the procedure for turning the unit on and off, including the function of the power switch and LEDs.
Guides initial network setup and configuration using the Configuration Manager, covering access and advanced settings.
Outlines steps to add the decoder to a video management system using the Configuration Manager.
Explains how to configure the decoder using the Video Client, including monitor wall setup.
A table listing common issues, potential causes, and recommended solutions for troubleshooting.
To Next Page