Bosch VMS - Permissions on an Enterprise System

Figure 4.3: Classic Scenario 3
Management Server
Operator Client
Configuration Client
IP camera / encoder
Permissions
Permissions on an Enterprise System
For an Enterprise System you configure the following permissions:
– Operating permissions of Operator Client defining the user interface for operating in the
Enterprise System, for example the user interface of the alarm monitor.
Use an Enterprise User Group. Configure it on the Enterprise Management Server.
4.1.2
Bosch Video Management System Concepts | en 17
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client