Need help?Do you have a question about the Bosch DINION IP 5000 MP and is the answer not in the manual?
Details the necessary software and hardware for browser access to the camera interface.
Steps to connect to the camera unit via its IP address and network settings.
Shows live video, text overlays, and other information on the browser window.
Used for viewing and replaying recorded sequences, with options for selection and export.
Setting up device identification, naming, and access control with passwords.
Settings for integrating the device into a network, including IP configuration.
Selects a profile for encoding the video signal on stream 1.
Records images from the camera to a storage medium.
Protects device access with different authorization levels and password management.
Manages date format, device time, time zone, and daylight saving time settings.
Basic camera settings like frame rate, LED, mirror/flip image, and reboot.
Adapts video data transmission characteristics for the operating environment.
Defines profiles for video data transmission characteristics and quality.
Configures H.264 and JPEG stream settings, including codecs and profiles.
Manages storage media connection, configuration, and activation.
Defines characteristics of recording tracks for standard and alarm recordings.
Configures automatic connection to IP addresses during an alarm event.
Settings for device network access, including IP, subnet mask, and gateway.
Manages firmware updates, upload history, configuration backup, and SSL certificates.
To Next Page
General