Bosch DINION IP 5000 MP - Picture Settings - Enhance

Picture settings – Enhance
Sharpness level
The slider adjusts the sharpness level between -15 and +15.
Zero position of the slider corresponds to the factory default
level.
A low (negative) value makes the picture less sharp. Increasing
sharpness brings out more detail. Extra sharpness can enhance
the details of license plates, facial features and the edges of
certain surfaces but can increase bandwidth requirements.
Backlight Compensation
Select Off to switch off backlight compensation.
Select On to capture details in high-contrast and extremely
bright-dark conditions.
Contrast enhancement
Select On to increase the contrast in low contrast conditions.
Intelligent DNR
Select On to activate intelligent Dynamic Noise Reduction (DNR)
which reduces noise based on motion and light levels.
Temporal noise filtering
Adjusts the Temporal noise filtering level between -15 and +15.
The higher the value, the more noise filtering.
Spatial noise filtering
Adjusts the Spatial noise filtering level between -15 and +15.
The higher the value, the more noise filtering.
7.5
7.5.1
7.5.2
7.5.3
7.5.4
46 en | Camera
Camera Browser
Interface
2015.04 | v1.592 | AM18-Q0678 Bosch Security Systems