Monochrome - the IR cut-off filter is removed, giving full IR
sensitivity.
Color - the camera always produces a color signal regardless of
light levels.
Switch level
Set the video level at which the camera in Auto mode switches
to monochrome operation (-15 to 0 to +15).
A low (negative) value means that the camera switches to
monochrome at a lower light level. A high (positive) value means
that the camera switches to monochrome at a higher light level.
Note:
To ensure stability when using IR illuminators, use the alarm
interface for reliable Day/Night switching.
Camera Browser
Interface
Camera | en 45
Bosch Security Systems 2015.04 | v1.592 | AM18-Q0678
To Next Page
Loading...