Note:
To use the UPnP function on a Windows computer, both the
Universal Plug-and-Play Device Host and the SSDP Discovery
Service must be activated.
Quality of Service
The priority of the different data channels can be set by defining
the DiffServ Code Point (DSCP). Enter a number between 0 and
252 as a multiple of four. For alarm video you can set a higher
priority than for regular video and you can define a Post Alarm
Time over which this priority is maintained.
13.4.3
98 en | Network
Camera Browser
Interface
2015.04 | v1.592 | AM18-Q0678 Bosch Security Systems
To Next Page
Loading...