Pixel Counter
The number of horizontal and vertical pixels covered by the
highlighted area is displayed below the picture. With these
values you can check whether the requirements for specific
functions, for example, identification tasks, are fulfilled.
1. Click Freeze to freeze the camera image if the object that
you want to measure is moving.
2. To reposition a zone, place the cursor over the zone, hold
down the mouse button and drag into position.
3. To change the shape of a zone, place the cursor over the
edge of the zone, hold down the mouse button and drag
the edge of the zone to the required position.
7.10
Camera Browser
Interface
Camera | en 51
Bosch Security Systems 2015.04 | v1.592 | AM18-Q0678
To Next Page
Loading...