Alarm message
Enter the message to be displayed on the image in the event of
an alarm. The maximum text length is 31 characters.
Transparent stamping
Check this box to make the stamp on the image transparent.
Video authentication
Select a method for verifying the integrity of the video in the
Video authentication drop-down box.
If you select Watermarking all images are marked with an icon.
The icon indicates if the sequence (live or saved) has been
manipulated.
If you want to add a digital signature to the transmitted video
images to ensure their integrity, select one of the cryptographic
algorithms for this signature.
Enter the interval (in seconds) between insertions of the digital
signature.
GB/T 28181
This page allows you to set the parameters for conformance to
the GB/T 28181 national standard “Security and protection
video monitoring network system for information transport,
switch and control”.
5.4.5
5.4.6
5.4.7
5.5
32 en | General settings
Camera Browser
Interface
2015.04 | v1.592 | AM18-Q0678 Bosch Security Systems
To Next Page
Loading...