3. The start and stop time are filled-in for the selected track. If
required, change the times.
4. Select a target.
5. Select the original or a condensed speed.
6. Click the save icon
.
Note:
The target server address is set on the Network / Accounts
page.
Searching for tracks
1. Click the search tab .
2. Click one of the Search mode options to define the search
parameters.
3. To limit the search to a particular time range, enter the
start and stop times.
4. Click Start Search.
5. The results are shown in the search results tab .
6. Click a result to play it back.
7. Click the search tab
again to define a new search.
Controlling playback
The time bar below the video image allows quick orientation.
The time interval associated with the sequence is displayed in
the bar in gray. A green arrow above the bar indicates the
position of the image currently being played back within the
sequence.
The time bar offers various options for navigation in and
between sequences.
3.2.3
3.2.4
Camera Browser
Interface
Operation via the browser | en 21
Bosch Security Systems 2015.04 | v1.592 | AM18-Q0678
To Next Page
Loading...