2. Move the cursor to the left side of the Image pane.
The cursor changes to an arrow.
Click to swivel to the left direction in a small step. Keep the mouse button pressed to
swivel continuously. Drag to the outside direction to accelerate.
3. Move the cursor to another direction and perform a corresponding tilt or swiveling task.
4. Move the cursor to the center of the Image pane.
The cursor changes to a magnifying class.
In the upper area, use the zooming in function.
In the lower area, use the zooming out function.
Bosch Video Management System Using maps and the PTZ cameras | en 37
Bosch Sicherheitssysteme GmbH Operator's Manual 2013.07 | V1 | Operator Client
To Next Page
Loading...