de Troubleshooting
disturbance Cause and troubleshooting
High spin speed
number is not
reached.
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
▶ Start the program Sling .
Spin program
does not start.
The drain pipe or water drainage hose is blocked.
▶ Clean the drain pipe and water drain
running hose.
The drain pipe or water drainage hose is kinked or
pinched.
▶ Make sure the drain pipe and the
The water drainage hose is not kinked or trapped.
The unbalance control system has stopped spinning
due to uneven distribution of the laundry.
▶ Redistribute the laundry in the drum.
Note: Place large and small items of laundry together
in the drum. Laundry items of different sizes are
better distributed during spinning.
▶ Start the program Sling .
Rustling, zi-
screeching sound.
Water is rinsed into the detergent drawer under
pressure.
▶ Not a fault - normal operating noise.
Loud noises
rend of skidding.
Device is not aligned correctly.
▶ Align the device
The feet of the device are not fixed.
▶ Fix the device feet. Align the device
Transport locks are not removed.
▶ Remove the transport locks
Rattling noises,
Rattling in the lye
pump.
Foreign matter has got into the drain pump.
▶ → "
Cleaning the drain pump ", page 46
Slurping, rhythmic
nice sucking noise.
The detergent solution pump is active, the detergent solution is being
pumped out.
▶ Not a fault - normal operating noise.
Wrinkling. Spin speed is too high.
▶ For the next wash cycle, set a low
adjust the spin speed.
Load is too high.
56
To Next Page
Loading...
