Bosch WAX32KC1FG - Page 52

NL Troubleshooting
Malfunction Cause and Troubleshooting
Spin result is
not to satisfaction-
ness. The laundry is
too wet / too damp.
Unbalance control system compensates for
imbalance through reduced spin speed.
▶
Redistribute the laundry in the drum.
Remark: If possible, place large and small items of
laundry together in the drum. Different sized laundry
is more evenly distributed during the spin cycle.
▶
Start the program Centrifuge..
Detergent residue on
the damp laundry.
Detergents can contain water-insoluble substances,
which deposit on the laundry.
▶
Start the program To rinse.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1. Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 32
2. Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 38
3. Clean the dosing containers.
4. Refill the dosing containers.
→ "Filling the dosing container", page 36
Basic dosing amount not set correctly.
▶
When the intelligent dosing is activated, reduce the
basic dosing amount
→ Page 37 .
Detergent residue on
the dry laundry.
Detergents can contain water-insoluble substances,
which deposit on the laundry.
▶
Brush the laundry after washing and drying.
Unsuitable detergent has been placed in the dosing
container of the intelligent dosing system.
1. Check whether the detergent used is suitable.
→ "Detergent and laundry care agent",
Page 32
2. Empty the dosing containers.
→ "Cleaning the detergent drawer",
Page 38
3. Clean the dosing containers.
4. Refill the dosing containers.
→ "Filling the dosing container", page 36
Basic dosing amount not set correctly.
52