NLService
3.Fold the dosing aid downwards and
click into place.
aThe display shows whether the program
maduur or the ready in time
displayed.
aAfter the program end, it shows
display: End.
2.If is selected, the laundry is not
spun and the water is drained
after rinsing.
Comments
sIf no laundry is
the anti-crease program starts after
15 minutes. The program lasts
about 30 minutes. The display
shows0:00and appears. Press
anywhere on the display to cancel
the anti-crease program and take
out the laundry.
sWhen "Hot" appears, then
the appliance cools down the laundry.
When "Hot" goes out, the laundry has
cooled down.
4.Slide in the detergent drawer.
14.8 Dosing detergent and care
agent
Comments
sUse the dosing aid for liquid
Do not use with gel-like detergents,
washing powder, switched on
prewash or ready-in time. sKeep the
directions for washing
agent and laundry care agent
→
Page 32
at.
14.10 Soaking laundry
Remark:No additional detergent is
needed. The soapy water is then used
for washing.
1.Pull out the detergent drawer.
2.Fill with detergent.
→
"Detergent drawer", Page 19
1.Start the program.
3.If desired, fill with a care product.
2.To pause the program, press after
approx. 10 minutes.
4.Slide the detergent drawer into the
appliance.
3.To resume the program after the
desired soaking time, press
.
14.9 Starting the program
14.11 Loading laundry
Remark:If you want to change the time
until the program end, first set the
ready in time.
1.Press .
The appliance pauses during
washing.
During drying, the appliance checks
whether it is possible to add
laundry.
1.on to press.
aThe drum rotates
load recognition
up to 2 minutes k
after that it flows
ready.
and find a
g place, which
an last and
water in the app
34
To Next Page
Loading...
