NLTransport, storage and disposal
19.1 Emergency release
1.Close the tap.
2.Empty the water inlet hose.
3.Switch off the device.
unlock door
Required:The drain pump is empty.
→
Page 40
4.Unplug the appliance from the
mains.
1. ATTENTION!Running water can
lead to material damage.
▶ Do not open the door if water can
be seen behind the glass.
5.Let the suds drain.
→
"Cleaning the drain
pump", page 40
6.Disassemble the hoses.
Pull down and release the
emergency release with the aid of a
tool.
20.2 Installing transport locks
Secure the device before transport
with the transport locks to avoid
damage.
1.Remove the 4 cover caps using a
screwdriver.
aThe door lock is unlocked.
2.Place the service door and click it into
place.
3.Close the service door.
Keep the cover caps.
20 Transport, on-
hit and drain
2.Install the 4 transport locks. Keep
the description
→
"Remove transport locks", page
14
and proceed in reverse order.
Here you will find an explanation of
how to prepare the device for
transport and storage. We also
explain how to dispose of old
appliances.
20.3 Restarting the device
20.1 Disassemble device
▶ For more information, see
→
"Setting up and
connecting", Page 13
and
→
"Before using for the first
time", Page 20
.
Remark:More information can be found
clue
and the QR code
or on
m.
in the digital usage by
scanning v in the table
of contents
www.bosch-home.co
54
To Next Page
Loading...
