Bosch WFF 16 series - End Programs with Rinse Hold; Exiting Rinse Hold Program

End programs with Rinse Hold.
Precondition: You have selected the
additional function "Rinse Hold".
The laundry is in the final rinse water. The
display shows the rinse hold. The door can be
opened only after spinning the laundry or
after pumping of the rinse water.
You have two ways to exit the program:
The laundry will be spun
Set the spin speed selector to the
desired numbers of revolution, eg.
600, or IVS.
The water is pumped out, the washing
is spun.
Or
The laundry is to be removed dripping
wet.
Set the program selector to 7. The
rinsing water is pumped out.