The knob for start and program flow
The programs are started with the knob for
starting. Turn the knob clockwise. The
program sequence display rotates with it and
can be set to the start position.
The knob for start can also be rotated
counterclockwise. The program sequence
displays but then does not rotate with it.
Always turn clockwise to adjust.
Program Flow
The knob for start also displays the current
program status.
After starting the display of the start time
voters running in overdrive on the top of your
location program.
During the wash program, the individual
program sections are displayed on the display
screen.
Symbols on the indicator disc.
To Next Page
Loading...
