End of the programme / Turning off the device
End of program
- The program start knob is in
the end position.
-The “Door” lamp is
extinguished.
To remove the laundry:
Press the "Door" button.
The loading door springs
open.
Remove any foreign objects (eg.
paper clips) from the drum and
rubber seal! Otherwise, there is a risk
of rusting!
Leave the machine door open slightly,
so that it can dry out.
Turning off the device
1. Press the "On / Off" button. The
light goes out.
For a device without Aqua-Stop:
2. Close the tap.
For a device with Aqua-Stop (see
figure) this is not necessary because
the safety device automatically locks
the water supply directly behind the
faucet at the end of the program.