EasyManua.ls Logo

Bosch WGB256A0ME - User Manual

Bosch WGB256A0ME
68 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Register your
new device on
MyBosch now and
get free benefits:
bosch-home.com/
welcome
Washing machine
WGB256A0ME
[en] User manual and installation
instructions

Table of Contents

Questions and Answers

  • K
    Kevin FritzAug 19, 2025
    Why is my Bosch WGB256A0ME Washer not working?
    • P
      Phyllis RodriguezSep 12, 2025
      Your Bosch washer might not be working due to several reasons: the mains plug of the power cord is not plugged in (connect the appliance to the power supply), the circuit breaker in the fuse box has tripped (check the circuit breaker), there has been a power cut (check whether the lighting in your room or other appliances are working), there is a software fault (press ?), the door is not closed (close the door), or the childproof lock is activated (deactivate it).
  • B
    btrujilloAug 21, 2025
    How to fix a Bosch WGB256A0ME Washer that is not draining?
    • J
      Jean SloanAug 21, 2025
      If the water is not draining from your Bosch washer, it could be due to a blocked drain pipe or water outlet hose (clean them). Alternatively, the drain pipe or water drain hose might be caught or jammed (ensure they are not kinked or trapped).
  • K
    Kenneth RiveraAug 23, 2025
    Why won't my Bosch WGB256A0ME programme start?
    • P
      Paul FosterAug 23, 2025
      The programme on your Bosch washer may not start because laundry is caught in the door (remove any trapped laundry), the detergent drawer has not been pushed in fully (push it in until the symbol goes out), or the pump for the intelligent dosing system is blocked. To resolve this, switch off the appliance, clean the pump unit, and switch the appliance back on. If the display appears again after cleaning the pump unit, or the programme cannot be started, call customer service. Also, the door cannot be opened, the temperature is too high (wait until the temperature has dropped), the programme can be cancelled, the water level is too high (select a suitable programme for draining) or open the door using the emergency release.
  • M
    Mr. Jose FisherAug 26, 2025
    Why is water leaking from the outlet hose of my Bosch WGB256A0ME Washer?
    • J
      Joe RichardsonAug 26, 2025
      If water is leaking from the water outlet hose of your Bosch washer, it could be because the water outlet hose is damaged (replace the damaged water outlet hose) or not connected correctly (connect the water outlet hose correctly).
  • L
    Lindsay MossAug 27, 2025
    Why is water leaking from the inlet hose of my Bosch WGB256A0ME Washer?
    • Z
      Zachary SimmonsAug 28, 2025
      If water is leaking at the water inlet hose of your Bosch washer, it means that the water inlet hose is not correctly or securely connected. Connect the water supply hose correctly and tighten the screw connection.
  • M
    Matthew DavisAug 29, 2025
    What to do if dirt on the door or seal causes leaks in my Bosch WGB256A0ME Washer?
    • M
      Michelle WileyAug 30, 2025
      If dirt on the door or seal is causing leaks in your Bosch washer, clean the door and the seal.
  • M
    martinjillSep 3, 2025
    What to do if my Bosch WGB256A0ME displays error E:30 / -10?
    • B
      Brittany McintyreSep 3, 2025
      If your Bosch washer is showing the error code E:30 / -10, it could be due to several reasons. The water pressure might be low (no action possible). Alternatively, the filter in the water inflow might be blocked (clean it). The tap could be turned off (turn on the tap). Finally, the water inlet hose might be kinked or jammed (ensure that it is not kinked or jammed).
  • M
    michael08Sep 5, 2025
    What to do if my Bosch WGB256A0ME displays error code E:35 / -10?
    • N
      nleonSep 5, 2025
      If your Bosch washer displays the error code E:35 / -10, it indicates there is water in the base trough or the appliance is leaking, in both cases turn off the water tap. It may also be because the detergent drawer has not been pushed in fully (push it in until the symbol goes out), the pump unit is not inserted (insert the pump unit into the detergent drawer and push the drawer until the symbol goes out), or the detergent dosage is too high. To address the detergent issue immediately, mix one tablespoon of fabric softener with 0.5 litres of water and pour the mixture into the compartment for manual dosing (not for outdoor clothing, sportswear or items stuffed with down).
  • K
    Kevin ReynoldsSep 7, 2025
    What to do if my Bosch Washer shows an error code and malfunctions?
    • T
      Tim WhiteSep 8, 2025
      If your Bosch washer displays a malfunction error code, try these steps: first, switch the appliance off and then on again. If the message reappears, disconnect the appliance from the power supply for at least 30 seconds by pulling out the plug or switching off the relevant circuit breaker in the fuse box. If the fault was a one-off, the message should disappear. If the message persists, contact after-sales service, specifying the exact error message.
  • C
    Carolyn GarciaSep 9, 2025
    What does error code E:10 / -00 / -10 / -20 mean on my Bosch Washer?
    • A
      Anthony PatelSep 9, 2025
      The error code E:10 / -00 / -10 / -20 on your Bosch washer indicates that the pump for the intelligent dosing system is blocked. To fix this: 1. Switch off the appliance. 2. Clean the pump unit. 3. Switch the appliance on. 4. If the display appears again after cleaning the pump unit, or the programme cannot be started, call customer service.

Summary

Safety

Safe installation

Instructions for safely installing the washing machine to prevent hazards.

Safe use

Guidelines for operating the appliance safely to avoid risks.

Safe cleaning and maintenance

Procedures for cleaning and maintaining the appliance safely.

Intelligent dosing system

Starting the programme with intelligent dosing system

How to initiate a wash cycle using the automatic dosing feature.

Filling the dispensers

Instructions for filling the detergent and fabric softener dispensers.

Home Connect

Setting up the Home Connect app

Steps to install and configure the Home Connect mobile application.

Setting up Home Connect

Instructions for connecting the appliance to the Home Connect service.

Buttons

Start

Starts, cancels, or pauses the washing programme.

SpeedPerfect

Activates or deactivates a shorter programme duration.

Intensive Plus

Activates or deactivates an extended washing programme.

Programmes

Cottons

Wash hard-wearing items made of cotton, linen or blended fabrics.

Cottons Eco

Energy-saving programme for hard-wearing cotton items.

Easy Care

Wash items made from synthetic or blended fabrics.

Programmes

Delicates;Silk

Wash delicate, washable items made from silk, viscose and synthetic fabrics.

Wool

Hand- or machine-washable items made from wool or containing wool.

Hygiene Plus

For allergy sufferers and strict hygiene requirements.

Programmes

Steam

For warming and steaming dry items to make them easier to iron.

Automatic 40°C

Automatically detects soiling and fabric type for optimal washing.

Accessories

Water inlet hose extension

Extends the water inlet hose for cold water or AquaStop.

Fixing brackets

Improves appliance stability and allows installation at a raised height.

Laundry

Preparing the laundry

Steps to prepare laundry for washing, including pocket checks and sorting.

Basic operation

Switching on the appliance

Steps for switching on the washing machine.

Setting a programme

Instructions for selecting and setting a wash programme.

Basic operation

Adjusting the programme settings

How to modify programme settings like temperature, spin speed, etc.

Loading laundry

Guidance on correctly loading laundry into the drum.

Adding detergent and care product

Instructions for adding detergent and care products manually.

Starting the programme

Steps to start the selected wash programme.

Basic operation

Soaking laundry

Instructions for using the soaking function in a wash cycle.

Adding laundry

How to add or remove laundry during a running programme.

Cancelling the programme

Steps for cancelling the current wash programme.

Resuming the programme when the programme status is Rinse Hold

How to resume a programme paused at Rinse Hold.

Childproof lock

Activating the childproof lock

Steps to activate the childproof lock to prevent accidental operation.

Deactivating the childproof lock

Steps to deactivate the childproof lock.

Intelligent dosing system

Starting the programme with intelligent dosing system

How to initiate a wash cycle using the automatic dosing feature.

Cleaning and servicing

Cleaning the drum

Procedure for cleaning the washing machine drum to maintain performance.

Programme counter

Calling up the programme counter

How to display the number of finished programmes.

Cleaning and servicing

Cleaning the detergent drawer

Steps for cleaning the detergent dispenser and its components.

Cleaning and servicing

Cleaning the drain pump

Procedure for cleaning the drain pump to remove blockages.

Cleaning and servicing

Cleaning the intake opening in the rubber gasket

How to clean the intake opening in the rubber gasket for proper function.

Troubleshooting

Emergency release

How to release the appliance door in an emergency.

Transportation, storage and disposal

Removing the appliance

Steps for safely removing the appliance for transport or disposal.

Inserting the transit bolts

Instructions for securing the appliance with transit bolts for transport.

Customer Service

Product number (E-Nr.), production number (FD) and consecutive numbering (Z-Nr.)

Information on how to find and use appliance identification numbers.

AQUA-STOP guarantee

Details of the manufacturer's guarantee for the Aqua-Stop system.

Bosch WGB256A0ME Specifications

General IconGeneral
CategoryWasher
Energy Efficiency ClassA+++
Dimensions (HxWxD)84.8 x 59.8 x 59 cm
ColorWhite
Delay StartYes
Child LockYes
TypeFront Load
Programs15

Related product manuals