04 - E-Lyte 4.3 Set Up
23
WARNING! Do not exceed the minimum seatpost insertion
details indicated on the main body of the seat-tube. Failure
to correctly install and adjust your seatpost can lead to
mechanical failure of the post or frame. If there is any confusion
regarding your seatpost insertion markings please contact
your Whyte retailer.
INFO: Do not use the seatpost if an oil leak is detected or if the
system needs to be bled. Your seatpost might be cable operated
in which case this does not apply. If the seatpost is compressed
and will not return to full extension, do not manually pull the
seatpost head up to extend.
INFO: Saddle angle and position can be adjusted to suit riders
preferred position. For guidance regarding rider adjustments
please consult the manufacturers manual.
WARNING! DO NOT attempt to adjust air pressure using the air
valve on the seatpost. Any change in the factory air pressure
setting will render the seat-post inoperable, requiring full service.
WARNING! Before every ride check and conrm the seatpost
does not slip in the frame. Check and conrm the saddle rails do
not slip in the seatpost clamp.
If tting or adjustment is required please consult the Seatpost
manufacturers manuals. Follow the installation instructions closely! Pay
attention to specied torques and proper tools needed.
Do not exceed the minimum insertion line. This can cause the post and/
or your frame to fail.
If you are not comfortable with the installation, set-up or use of your
Seatpost, please contact your local Whyte Bikes retailer or Whyte Bikes
directly.
For optimal performance and maximum life of your seatpost, be sure to
follow the maintenance schedule outlined by the manufacturer.
After a crash, accident or if you suspect possible damage, have the post
inspected by a professional bike mechanic.
To Next Page