30
<eBike Lock>
The <eBike Lock> can be activated for each user via the Bosch eBike
Flow APP. In the process, a key for unlocking the eBike is saved on the
smart-phone. The <eBike Lock> is automatically enabled in the following
cases:
– Switching off the eBike system via the control unit
– Automatically switching off the eBike system
– Removing the on-board computer
If the eBike system is switched on and the smart phone is connected to
the eBike via Bluetooth®, the eBike will be unlocked.
<eBike Lock> is linked to your user account.
If you lose your smart phone, you can log in to your user account on the
Bosch eBike Flow APP using another smart phone and unlock the eBike.
Warning! If you select a setting in the APP that could have negative
consequences in combination with the <eBike Lock> (e.g. deleting
your eBike or user account), you will be shown a warning messages
beforehand. Please read through these thoroughly and adhere to
the warnings that are issued (e.g. before deleting your eBike or user
account).
Setting Up the <eBike Lock>
In order to be able to set up the <eBike Lock>, the following conditions
must be fullled:
– The eBike Flow APP is installed.
– A user account has been created.
– The eBike is not currently updating.
– The eBike is connected to the smart phone via Bluetooth®.
– The eBike is stationary.
– The smart phone is connected to the Internet.
– The eBike battery is sufciently charged and the charging cable is not
connected. You can set up the <eBike Lock> in the eBike Flow APP in the
Settings menu item.
Interaction Between the eBike System and Gear Shifting
The gear shifting should be used with an eBike drive in the same way as
with a normal bicycle (observe the operating instructions of your eBike
on this point). Irrespective of the type of gear shifting, it is advisable
that you briey reduce the pressure on the pedals when changing
gear. This will aid gear shifting and reduce wear on the powertrain. By
selecting the correct gear, you can increase your speed and range while
applying the same amount of force.
Switching Bicycle Lights on/off (Mini Remote only)
Check that your bike lights are working correctly before every use.
To switch the bicycle lights on and off, press the button to increase the
assistance level/bicycle lights (4) for longer than 1 s.
Establishing a Smart phone Connection
In order to be able to use the following eBike functions, a smart phone
with the Bosch eBike Flow APP is required. Connection to the APP
occurs via a Bluetooth® connection.
1. Switch on the eBike system and do not start riding the eBike.
2. Begin Bluetooth® pairing by pressing and holding (>3’s)
the on/off button (12). Release the on/off button (12)
as soon as the lowest bar on the battery charge indicator
(13) shows the pairing process by ashing blue.
3. Conrm the connection request in the Bosch eBike Flow APP.
Activity tracking - In order to record activities, it is necessary to
register and log into the eBike Flow APP. To record activities, you must
consent to the storage of your location data in the APP. Without this,
your activities cannot be recorded in the APP. For location data to be
recorded, you must be logged in as the user.
Software updates - Software updates must be manually started in
the eBike Flow APP. Software updates are transferred to the operating
unit in the background of the APP as soon as it is connected to the APP.
During the update process, a green ashing light on the battery charge
indicator (13) shows the progress. The system is then restarted. You can
control the software updates via the eBike Flow APP.
05 SYSTEM CONTROL 5.5 Wireless Shift, Lights & Connectivity
To Next Page