02 - RIDE INFO 2.1 Out the Box
When unboxing your new Whyte eBike you will nd a Whyte Charger
Case containing numerous manuals (Including this manual). Please
ensure you read all relevant literature prior to assembly or riding your
eBike. Relevant manufacturer manuals for your eBikes components will
be provided. Ensure all documents are retained for assistance with
maintenance, cleaning, and warranty.
In addition to your charger case there will be a accessories box
containing components that are specic to your eBike. Follow the
instructions below or please contact your Whyte retailer for any support
required.
Please note: the Whyte charger box and accessories box will differ
between bike models and may not reect the illustrations in this manual.
Blanking grommets for the cable ports are provided incase internal cable
headset is retro-tted. Please consult your Whyte Retailer for further
details.
9
Tools Required
• 15mm Spanner
• Philips Head Screwdriver
Accessory Part Instructions:
In the bicycle accessories kit you will nd numerous components
relevant to your bicycle. If your bicycle is supplied with pedals you
will need a 15mm spanner to t them to the cranks. Ensure you have
identied the right and left pedal prior to installation. Tighten pedals to
a recommended 40.2-42.9 Nm (350-380 lb/in). A Philips screw driver is
required to mount reectors to your bicycle. Reectors are a crucial part
of the safety system and must not be removed. Before riding your Whyte
eBike please inform yourself of all applicable legal requirements to ride
To Next Page