EasyManua.ls Logo

Bosch WNA254U1AU - Programme Selection and Operation; Overview of Wash Programmes

Bosch WNA254U1AU
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Overview of programmes en
29
P Overview of
programmes
Overview of programmes
Selectable programme
Programme/Type of laundry Options/Information
Name of the programme
Brief explanation of the programme and for which fabrics it is
suitable.
Max. load for washing/
Max. load for drying
Max. load as kg
depending on the model and the pro-
gramme
selectable temperature* as °C
selectable spin speed* in rpm
possible additional programme settings*
possible setting for drying* (De)selecta-
ble è,
not selectable -
softener
Cottons i
Hard-wearing fabrics, heat-resistant fabrics made of cotton or
linen.
Notes
The symbol Û(drum clean information signal) flashes if
you have not used any programme at a temperature of
60°C or higher for an extended period. Do not load any
laundry, and select the Cottons i 90°C programme to
clean and care for the drum and the outer tub, then the
symbol will disappear. ~ Page 46
Switching the drum clean information signal on/off.
~ "Appliance settings" on page 40
10,0 (5,0**) kg/5,0 kg
- 90 °C
400 - 1400 rpm
G SpeedPerfect, Ï Rinse Plus,
x Anti Stain, ã Pre-treatment
Dry è (¾è, »è, öè)
possible
Cottons Eco 0
Hard-wearing fabrics, heat-resistant fabrics made of cotton or
linen.
Energy-optimised washing by reducing the temperature while
achieving a comparable washing result for the Cottons i pro-
gramme.
Note: The washing temperature is lower than the selected tem-
perature. If you want to achieve a higher water temperature, use
the Cottons i programme with a higher temperature as re-
quired.
10,0 kg/5,0 kg
- 90 °C
400 - 1400 rpm
Ï Rinse Plus, x Anti Stain, ã Pre-
treatment
Dry è (¾è, »è, öè)
possible
* Depending on the model and the programme.
** Reduced load with G SpeedPerfect additional programme setting.

Table of Contents

Related product manuals