To Next PageTo Next Page
Need help?Do you have a question about the Bosch WORCESTER Danesmoor Utility Regular 2022+ 25/32 and is the answer not in the manual?
General| Model | WORCESTER Danesmoor Utility Regular 2022+ 25/32 |
|---|---|
| Category | Boiler |
| Manufacturer | Bosch |
| Year | 2022+ |
| Type | Regular |
| Output | 25/32 kW |
| Fuel Type | Oil |
| Dimensions (H x W x D) | 855 x 370 x 600 mm |
| Mounting | Floor |
Details requirements for adhering to building regulations, OFTEC schemes, and British Standards for safe installation.
Presents detailed technical specifications for the boiler models, including output, capacities, and dimensions.
Details essential steps for cleaning primary heating systems, including safety precautions and flushing procedures.
Provides crucial guidance on oil supply systems, including gravity feed, sub-gravity feed, and suction lift configurations.
Details requirements for condensate pipework, including fall, material, and routing to prevent freezing and ensure proper drainage.
Specifies safe installation locations and required clearances around the boiler, including warnings about carbon monoxide.
Outlines specific restrictions for installing boilers in bathrooms due to electrical safety and zoning regulations.
Addresses important factors for flue systems, including accessibility, room air operation, and combustion air quality.
Illustrates various flue terminal positions with minimum clearance requirements to ensure safe discharge and prevent nuisance.
Explains requirements for conventional flue installations, including material suitability, sizing, and terminal positioning.
Details specifications for room sealed flue configurations, including maximum lengths, bends, and terminal fitting.
Illustrates minimum clearances and positioning requirements for flue terminals to manage plume dispersion effectively.
Step-by-step instructions for physically installing the boiler unit, including panel removal and burner handling.
Refers to separate instructions for fitting flue kits, noting outlet options and minimum flue lengths.
Guides on handling the oil burner and pump, including nozzle access, replacement, and break plate alignment.
Covers all aspects of electrical installation, including safety, access, wiring diagrams, and connections.
Presents the standard 230V wiring diagram for the Utility boiler, showing component connections and colour coding.
Shows the 230V wiring diagram specifically for the Utility System model, including component labels.
Lists essential checks to be performed before starting the commissioning process, ensuring all connections and supplies are correct.
Covers the initial steps for starting the boiler, including oil supply priming and burner operation procedures.
Outlines the process for performing combustion checks, measuring CO2 levels, flue gas temperature, and adjusting settings.
Details the crucial handover process, including customer instruction on operation, safety, and documentation.
Outlines the steps for re-commissioning the burner after service, focusing on seal integrity and gas-tight connections.
Details a logic flowchart for diagnosing faults related to the 535 SE/LD RDB control box and its associated components.
A comprehensive checklist for competent persons to verify correct installation and commissioning, ensuring compliance.
