4444
Greenstar combi boiler range
horizontal fl uing options
The Greenstar combi boiler range offers the choice of
2 differently sized horizontal RSF fl ue systems, a 100mm
diameter telescopic fl ue kit including a plume management
kit, and a 125mm diameter telescopic fl ue kit. Both systems
have different maximum lengths. The following diagrams
detail the permissible lengths.
Horizontal RS fl ue
The following criteria should be noted when planning
the installation:
•
The concentric fl ue system must be inclined at
3º (52mm per metre) from the appliance, to allow
condensate to drain back into the boiler
•
A white plume of condensation will be emitted from
the terminal because the appliance operates at high
effi ciency. Care must be taken when selecting the fl ue
terminal position
•
To achieve a maximum fl ue length, one of the extension
fl ue kits will need to be cut so that the permitted
maximum fl ue length is not exceeded
•
Horizontal fl ue options 1-6 illustrate common fl ue
installations. Other confi gurations of the fl ue system are
possible up to, and not exceeding, the stated maximum
fl ue lengths.
100mm dia. standard telescopic fl ue kit
1 x fl ue turret elbow
570mm (100mm dia.) of fl ue duct
1 x weather sealing ring
1 x internal collar
Part No. 7 716 191 082
125mm dia. standard telescopic fl ue kit
1 x fl ue turret elbow
600mm (125mm dia.) of fl ue duct including terminal
(as measured from centre of fl ue outlet)
1 x weather sealing plate
1 x internal plate
Part No. 7 719 003 702
Accessories
Flue diameter 100mm 125mm
Greenstar CDi Classic series
Minimum fl ue length 350mm* 405mm
Maximum fl ue length
29CDi Classic 7,900mm 18,500mm
34CDi Classic 7,000mm 16,000mm
38CDi Classic 6,000mm 12,500mm
42CDi Classic 6,000mm 12,000mm
Greenstar CDi Compact and Si Compact series
Minimum fl ue length 350mm* 405mm
Maximum fl ue length 6,000mm 15,000mm
Greenstar i Junior series
Minimum fl ue length 350mm* 405mm
Maximum fl ue length 4,600mm 13,000mm
*Can be cut to 130mm. Please refer to instructions.
™
™
Components Part No. Description
100mm diameter
7 716 191 082
Standard telescopic fl ue kit
(350 - 570mm)
7 716 191 171
Long telescopic fl ue kit
(570 - 790mm)
7 716 191 083 Extension fl ue kit (960mm*)
7 716 191 172 2m fl ue extension
7 716 191 133 Short fl ue extension (220mm*)
7 716 191 084 90º bend
7 716 191 085 45º bend
7 719 002 432
High level horizontal
fl ue adaptor
7 716 191 092 Support bracket kit
7 716 191 173 Support bracket kit (6 pack)
7 716 191 177
Support bracket kit
(CDi Compact & Si Compact)
7 716 191 178
Support bracket kit (6 pack)
(CDi Compact & Si Compact)
*Dimensions when fi tted
125mm diameter
7 719 003 702 Standard telescopic fl ue kit
7 719 003 666 Extension fl ue kit (960mm*)
7 719 003 664 90º bend
7 719 003 665 45º bend
7 719 002 433
High level horizontal
fl ue adaptor
7 716 191 174 Support bracket kit
7 716 191 179
Support bracket kit
(CDi Compact & Si Compact)
*Dimensions when fi tted
To Next Page
Loading...
