4646
Note: The short fl ue extension (100mm dia.)
may be used as an alternative to the standard
extension as required up to the maximum fl ue
lengths stated (Part No. 7 716 191 133).
Option 4: Extension fl ue horizontal and upwards
Components
Part No. 100mm
7 716 191 082 7 716 191 083 7 716 191 084 7 719 002 432
Part No. 125mm
7 719 003 702 7 719 003 666 7 719 003 664 7 719 002 433
Maximum lengths (mm) & no. of components required
Greenstar 29CDi Classic
100mm 7,900 1 up to 8 1 1
125mm 18,500 1 up to 19 1 1
Greenstar 34CDi Classic
100mm 7,000 1 up to 7 1 1
125mm 16,000 1 up to 16 1 1
Greenstar 38CDi Classic
100mm 6,000 1 up to 6 1 1
125mm 12,500 1 up to 13 1 1
Greenstar 42CDi Classic
100mm 6,000 1 up to 6 1 1
125mm 12,000 1 up to 12 1 1
Greenstar CDi Compact and Si Compact series
100mm 6,000 1 up to 6 1 1
125mm 15,000 1 up to 15 1 1
Greenstar i Junior series
100mm 4,600 1 up to 4 1 1
125mm 13,000 1 up to 13 1 1
Note: The maximum fl ue length must be reduced by the
following amounts for each bend used.
45º bend 90º bend
Greenstar CDi Classic
60/100mm fl ues
750mm 1,500mm
Greenstar CDi Classic
80/125mm fl ues
1,000mm 2,000mm
Greenstar CDi Compact and
Si Compact – all fl ue sizes
1,000mm 2,000mm
Greenstar i Junior
– all fl ue sizes
1,000mm 2,000mm
Option 3: Extension fl ue horizontal
using a second 90º bend
Components
Part No. 100mm
7 716 191 082 7 716 191 083 7 716 191 084
Part No. 125mm
7 719 003 702 7 719 003 666 7 719 003 664
Maximum lengths (mm) & no. of components required
Greenstar 29CDi Classic
100mm 6,400 1 up to 6 1
125mm 16,500 1 up to 17 1
Greenstar 34CDi Classic
100mm 5,500 1 up to 6 1
125mm 14,000 1 up to 14 1
Greenstar 38CDi Classic
100mm 4,500 1 up to 4 1
125mm 10,500 1 up to 11 1
Greenstar 42CDi Classic
100mm 4,500 1 up to 4 1
125mm 10,000 1 up to 10 1
Greenstar CDi Compact and Si Compact series
100mm 4,000 1 up to 4 1
125mm 13,000 1 up to 13 1
Greenstar i Junior series
100mm 2,600 1 up to 3 1
125mm 11,000 1 up to 11 1
To Next Page
Loading...
