Bosch WORCESTER Greenstar CDi Classic Series - Page 50

5050
Note: The short fl ue extension (100mm dia.)
may be used as an alternative to the standard
extension as required up to the maximum fl ue
lengths stated (Part No. 7 716 191 133).
Option 3: Vertical balanced fl ue system
with two 45º bends
Components
Part No. 100mm
7 719 002 430 7 716 191 083 7 716 191 085
Part No. 125mm
7 719 002 431 7 719 003 666 7 719 003 665
Maximum lengths (mm) & no. of components required
Greenstar 29CDi Classic
100mm 7,900 1 up to 7 2
125mm 16,500 1 up to 16 2
Greenstar 34CDi Classic
100mm 6,500 1 up to 6 2
125mm 14,000 1 up to 14 2
Greenstar 38CDi Classic
100mm 6,000 1 up to 6 2
125mm 14,000 1 up to 14 2
Greenstar 42CDi Classic
100mm 6,000 1 up to 6 2
125mm 14,000 1 up to 14 2
Greenstar CDi Compact and Si Compact series
100mm 4,000 1 up to 3 1
125mm 13,000 1 up to 12 1
Greenstar i Junior series
100mm 4,400 1 up to 4 2
125mm 13,000 1 up to 13 2
Option 4: Vertical balanced fl ue system
with two 90º bends
Components
Part No. 100mm
7 719 002 430 7 716 191 083 7 716 191 084
Part No. 125mm
7 719 002 431 7 719 003 666 7 719 003 664
Maximum lengths (mm) & no. of components required
Greenstar 29CDi Classic
100mm 6,400 1 up to 6 2
125mm 14,500 1 up to 14 2
Greenstar 34CDi Classic
100mm 5,000 1 up to 4 2
125mm 12,000 1 up to 11 2
Greenstar 38CDi Classic
100mm 4,500 1 up to 4 2
125mm 12,000 1 up to 11 2
Greenstar 42CDi Classic
100mm 4,500 1 up to 4 2
125mm 12,000 1 up to 11 2
Greenstar CDi Compact and Si Compact series
100mm 2,000 1 up to 1 2
125mm 11,000 1 up to 10 2
Greenstar i Junior series
100mm 2,400 1 up to 2 2
125mm 11,000 1 up to 10 2
Note: The maximum fl ue length must be reduced by the
following amounts for each bend used.
45º bend 90º bend
Greenstar CDi Classic
60/100mm fl ues
750mm 1,500mm
Greenstar CDi Classic
80/125mm fl ues
1,000mm 2,000mm
Greenstar CDi Compact and
Si Compact – all fl ue sizes
1,000mm 2,000mm
Greenstar i Junior
– all fl ue sizes
1,000mm 2,000mm